The Manufacturer warrants the Linear Proportional Convector and compo-
nents of the enclosed product against any defect in material or workmanship
for a period of one year from the date of purchase, with the exception of the
elements which are warranted to be free from defect in material and work-
manship for ten years. In full satisfaction of any claims under this Warranty
the Manufacturer will repair or replace without charge, in its factory or in the
eld as it alone may decide, any parts which in its opinion are defective.
The Manufacturer shall not be responsible for any transportation or ship-
ping costs in relation to such repair or replacement except as specically
assumed by it. Misuse of this product or repairs by persons other than the
Manufacturer’s authorized personnel without the Manufacturer’s written ap-
proval will void this Warranty.
This Warranty is in lieu of all other warranties or conditions whether ex-
pressed or implied including but not limited to those of merchantability or
tness for purpose and shall constitute the sole remedy of the Purchaser
and the sole liability of the Manufacturer in respect of the sale of the product,
whether in the nature of breach or breach of fundamental term, or of negli-
gence or otherwise.
The Manufacturer shall not be liable for any special, indirect or consequen-
tial damages or for any damages resulting from removal or replacement of a
Linear Proportional Convector subject to warranty claim without the Manu-
facturer’s authorization.
This Warranty is transferable by the original consumer purchaser of the
product. Any claims under this Warranty must be submitted in writing to the
Service Manager, Dimplex North America Ltd., 1367 Industrial Rd., Cam-
bridge, Ontario N1R 7G8, Canada.
Warranty
Maintenance
CAUTION: Before removing the front cover for cleaning, make
certain the power has been turned off at the circuit breaker pan-
el, to prevent electric shock.
CAUTION: To avoid burns, allow adequate time for the element
and body casing to cool before attempting to work on the linear
convector.
The LPC series contain no moving parts. Since the appliance con-
tains no moving parts little maintenance is required beyond vacuum
cleaning. It is however essential that the linear convector is not
operated with an accumulation of dust or dirt on the element, as this
can cause a build up of heat and eventual damage. For this reason
the linear convector must be inspected regularly, depending upon
conditions and at least at yearly intervals. Once cleaning is com-
plete replace the front cover and restore power.
!
NOTE: The user can perform cleaning ONLY. All other servicing
should be performed by qualied service personnel.
3
E. Synchronized Icon
The LPC features CONNEX
TM
, a wireless technology that works
with Dimplex single and multi-zone CONNEX
TM
controllers to pro-
vide simple whole home connectivity and comfort. CONNEX
TM
con-
trollers are available to control one or multiple LPC or PCH within a
50’ (15 m) radius. In order for the controller to have this function the
LPC and the controller will need to be synchronized. To do this:
1. On the LPC heater press and hold the V button for 3 seconds,
both the and icons will begin to ash.
2. Press the - , + and then V, on the LPC heater.
3. Within 10 seconds press any button once on the CONNEX
TM
controller.
!
NOTE: There is a 3 second delay between pressing the last but-
ton the CONNEX
TM
controller and the LPC heater.
!
NOTE: To desynchronize a LPC heater from the synchronized
CONNEX
TM
controller, on the LPC heater:
1. Press and hold the V for 3 seconds.
2. Press the V, + and then -.
Nothing needs to be done to the CONNEX
TM
controller.
Dimplex single and multi-zone CONNEX
TM
controllers are sold
separately and are available for purchase from your authorized
Dimplex dealer.
To nd your local Dimplex dealer, visit www.dimplex.com.
F. Lock Icon
The Linear Proportional Convector Heater has a Button Lock fea-
ture, to prevent settings from accidentally being changed.
1. Press and hold the V for 3 seconds. Both the and Icons
will begin to ash.
2. To Enable: Within 5 seconds press +, then -, then +, then -.
The
icon will now be visible.
To Disable: Within 5 seconds press -, then +, then -, then +.
The
icon will not be visible.
!
NOTE: The LPC can be locked in either the Comfort or Economy
Setting. Ensure that the desired icons are present when locking is
complete.
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2013 Dimplex North America Limited
To Previous Page
Loading...
Need help?
General
