Introduction
DirectBikes thanks you for purchasing your new
DB125T-13 motorcycle. We produce our
motorcycles using some of the most advanced
production techniques in the world.
We want you to enjoy your new machine and have
compiled a basic manual for you that covers the
assembly out of the crate and the basic
maintenance. Please read carefully. If in any doubt
consult a suitably qualified person or our technical
department.
Proper assembly and maintenance will ensure your
safety and the long service life of the machine.
Identification
The VIN or chassis number is located on the frame
of the motorcycle and is either under the seat or
under the clip in cover in the front of the footwell.
The engine number is located on the left side on the
bottom of engine.
Tools
Please have a selection of good quality tools ready
which include; Cutters, knife, hammer, 8, 10, 12, 13,
14, 17mm sockets and spanners, ratchet, extension
bar, flat screwdriver’s, Philip screwdriver’s, pliers,
magnetic tray, lube, multi-purpose grease and
cleaning cloths.
The Crate
Before starting check the model details against the
invoice details and any signs of damage to the box.
To Next Page
Loading...