Dirt Devil Scorpion User Manual

10
To reduce the risk of personal injury, turn power switch off before cleaning or servicing. Do not use
vacuum without dirt cup or filters in place.
WARNING
1. While holding the dirt cup and
handle, press dirt cup release
button.
3. Remove filter assembly from
dirt cup & separate the white
filter from the filter housing.
Tap filter over a trash can to
remove debris. Be sure to
also wipe debris from the filter
housing.
2. Remove the dirt cup to access
filter.
4. Put the filter back into the
filter housing and place filter
assembly back into the dirt
cup. Reassemble dirt cup to
body, align bottom first and
rotate up until it clicks.
NOTE: Filter is rinseable with water. Do not use soap/detergent. Let filter air dry for 24 hours or until
completely dry.
LUBRICATION The motor is equipped with bearings which contains sufficient lubrication for its lifetime.
The addition of lubricant could cause damage. Do not add lubricant to motor.
NOTE: Do not discard filter or filter housing.
For replacement filter F101 visit dirtdevil.com or call us
at (800) 321-1134.
TIP: To maintain performance, filter should be changed every 3-6 months, or as needed.
FILTER
HOUSING
FILTER
PRESS

Dirt Devil Scorpion Specifications

General

Cleaning type	-
Product color	Red
Dust container type	Bagless
Wall mountable	Yes
Charging time	24 h
Battery voltage	6 V
Battery technology	Nickel-Cadmium (NiCd)
Vacuum wand assembly	No

Weight and Dimensions

Weight	816 g
Nozzle width	38 mm