Dirt Devil Swift Stick User Manual

HOW TO USE AS A STICK VAC
1. Hold body of unit in an upright position (Diagram 1).
2. With upper handle grip facing the left, insert handle into opening (Diagram 2) then turn clockwise 90 degrees so
upper handle grip is facing back.
3. With handle firmly in place, twist locking collar clockwise until cord wrap on collar is on the back of the vacuum
(Diagram
4). NOTE: Your upper and lower cord wrap should both be located on the back of the unit (Diagram #a).
4. Insert floor tool into dirt cup nozzle (Diagram 5).
HOW TO USE AS A HAND VAC
1. Remove handle bv turnina collar a full turn counter clockwise (Diaqram 1).
- -- -.-
2. Turn upper hand~; grip t< the left 90 degrees (Diagram 2). NOTE: ~our cord wrap hook should now be located on the
side of the handle.
3. Remove handle from the body of unit (Diagram 3).
4. Remove floor tool from dirt cup nozzle (Diagram 4).
5. To attach crevice tool, insert crevice tool into the dirt cup nozzle (Diagram 5).

Dirt Devil Swift Stick Specifications

General

Cleaning type	Dry
Vacuum air filtering	-
Dirt separating method	Filtering
Working width (standard brush)	228.6 mm
Product type	Upright vacuum
Dust capacity	- L
Product color	Black, Red
Dust container type	Bagless
Power source	AC
AC input voltage	120 V
Maximum input power	- W
Cord length	5.18 m
Quantity	1
Crevice tool	Yes

Weight and Dimensions

Weight	1810 g