DISCO DAD321 Maintenance Manual

Intro-2
Part replacement
When replacing parts, be sure to use the genuine DISCO brand. If any parts
other than DISCO's genuine parts are used, DISCO shall assume no liability
for any damage of any kind.
When replacing components using the UL-listed parts, be sure to use the UL-
listed parts to be installed.
When replacing any critical parts, consult your nearest DISCO office. If any
critical parts are replaced without consulting DISCO, DISCO shall assume no
liability for any consequences arising therefrom.
Part warranty period
Part warranty period is as follows:
Part Warranty period
Electrical parts having contact points Six months from the B/L date
Consumable parts Not covered
Parts other than the above 12 months from the B/L date
Documentation for this machine
The following five written manuals are provided for this machine.
This manual is the Maintenance Manual indicated by the arrow.
Manual Who should read Contents
Installation Manual Maintenance
personnel
Operational procedures for
machine installation and
adjustment
Operation Manual Operator Operational procedures to be
performed by operators
Data Maintenance
Manual
Data maintenance
personnel
Screen contents for data entry and
data entry procedures
Maintenance
Manual
Maintenance
personnel
Servicing, inspection and
adjustment procedures to be
performed by customers
Technical
Reference
Maintenance
personnel
Machine specifications,
circuit diagrams, illustrations and
part lists
Unit notation
International System of Unit is adopted to express any unit. The values in the
parenthesis are reference data. Also, all the pressure values are expressed in
gauge pressure.
Sample

DISCO DAD321 Specifications

General

Brand	DISCO
Model	DAD321
Category	Saw
Language	English