Intro-1
INTRODUCTION
About this manual
This Data Maintenance Manual describes the screen details related to certain
operations and procedures for setting operational data and machine operation
data concerning Automatic Dicing/Cutting Saws 3*1 Series Models DAD321,
DAC351, DAD361, DAD341 and DAD381 for data maintenance personnel.
To ensure safety
To ensure safety, be sure to thoroughly read and understand the contents of this
manual before starting any operation of the machine. Note that this manual is
based on the software version of 5.4 series.
When performing data setup or operation related to data, be sure to follow the
procedures set forth in this manual.
Definition of a manager and an operator
This manual defines a manager and an operator as follows:
Category Applicable
Personnel
Job
Manager
Management
representative
The person who is responsible for overall
management of machines and operators.
Maintenance
personnel
The qualified person who received DISCO
machine maintenance training.
Operator
Data maintenance
personnel
The qualified person who is responsible
for management of software data of the
machine.
Operator The person who operates the machine to
process workpieces.
To Next Page
Loading...
Need help?
General
