Need help?Do you have a question about the Dish TV S7070 and is the answer not in the manual?
General| Brand | Dish TV |
|---|---|
| Model | S7070 |
| Category | TV Receiver |
| Language | English |
General safety warnings and precautions for operating the satellite receiver, including water, heat, power supply, and cleaning.
Instructions for connecting the satellite receiver to power and display devices.
Steps to select the user's location for initial setup, typically involving country and city selection.
Automatic tuning process for Freeview channels, showing progress and completion.
Confirmation of successful channel setup and readiness to use the receiver.
Gateway to manage all channel-related functions and settings.
Menu for satellite and channel installation, scanning, and setup.
Menu for configuring system-wide settings like language, OSD, and time.
Menu for accessing software upgrades, version information, and signal monitoring.
Option to set or change the country for region-specific settings or channel tuning.
Access to the Electronic Programme Guide for current and future channel information.
Interface for managing, organizing, locking, and skipping channels.
Function to manually add new channels by specifying technical parameters.
Allows modification of existing channel parameters, including PID values.
Option to delete all services within specific categories like TV, Radio, or Transponders.
Detailed steps for manually adding a channel, including satellite, transponder, and PID details.
Procedure to modify PID values and other parameters of already added channels.
How to delete all TV, Radio, FTA, Scrambled services, or Transponders.
Configure satellite details, LNB settings, and DiSEqC for receiving channels.
Scan a wide frequency range to find all available channels, not limited to pre-defined transponders.
Manage transponders by adding, editing, or deleting them for satellite reception.
Configure motor settings for dish movement, including DiSEqC 1.2 and USALS.
Restore the receiver to its original factory settings, erasing all user configurations.
Reset system settings like language and OSD to defaults without affecting channels.
Select satellite, LNB number, 22kHz, DiSEqC switch, and motor for signal reception.
Choose between Toneburst, DiSEqC 1.0, 1.1, or Motor (1.2/USALS) for dish control.
Confirming settings to initiate the tuning process and collect available services.
Scan a specified frequency range to find all available channels, including unknown ones.
Filter services by type (ALL, FTA, Scrambled) and review collected carrier details.
Manage transponder data, including adding new carriers and editing existing ones.
Select DiSEqC 1.2 or USALS, and configure dish moving types and positions.
Configure dish movement via USER, INSTALLER, GotoX, or Advanced modes.
Set dish moving type to Installer for continuous movement or Goto X for specific positions.
Enable/disable DiSEqC 1.2 features and set East/West motor movement limits.
Manually drive the dish East/West and set East/West limits for motor operation.
Recalculate the dish's logical position or reset it to the reference position.
Save changed motor settings and confirm the update, positioning the dish automatically.
Configure USALS for automatic dish positioning using satellite angle, latitude, and longitude.
Adjust satellite angle, longitude, latitude, frequency, symbol rate, and polarization.
Reset receiver to default settings, erasing all user data and requiring re-installation.
Reset system configurations (language, OSD, time) to factory defaults without affecting channels.
Configure receiver language, audio preferences, and subtitle language.
Adjust On-Screen Display settings, including banner position and time display.
Configure TV-related settings like aspect ratio, display mode, and video output.
Set manual or automatic time, GMT offset, and summer time.
Set or change passwords for system, service, and parental control access.
Configure timers for once, daily, or weekly wake-ups and manage timer records.
Configure timers for once, daily, or weekly wake-ups and manage timer records.
Procedure for upgrading the receiver's software version.
View hardware, software, and loader version details, including build date and time.
Check signal strength and quality with options to adjust various parameters.
Monitor signal strength/quality and adjust LNB, frequency, symbol rate, and polarization.
Choose a city after factory reset to install carriers and collect selected city channels.
Display programme schedules with short and extended descriptions for selected services.
Use keys to navigate service lists, events, and view extended event descriptions.
Select services based on satellite, mode (All, FTA, Scrambled), and sorting order.
Organize service lists by name, frequency, carrier, or TP in ascending or descending order.
Browse favourite services, group them into categories, and view all services.
Switch to Teletext mode, navigate pages using numeric keys, and use color keys for links.
Use GUIDE key and numeric keys to enter and view Teletext subpages.
Choose Teletext/TTxT subtitles and select preferred language or switch display.
Choose DVB subtitles and select preferred language or switch display.
Load and navigate MHEG pages using keys, including starting applications and selecting options.
Display programme schedules, event details, and navigate between current/next events.
Shows current time in hh:mm:ss format when no menu is active, if OSD Time is ON.
Switch channels directly using numeric keys, with invalid entry handling.
Adjust volume levels using Vol +/- keys and mute/unmute sound using the Mute key.
Displays channel index, name, time, satellite, carrier parameters, and icons for status.
Switch between TV and Radio modes, with different banner displays for each.
View upcoming event information using Left/Right keys for current and next events.
Diagram illustrating all buttons on the remote control and their respective functions.
To Next Page
