Need help?Do you have a question about the Disney DT1350-P and is the answer not in the manual?
General| Type | TV Receiver |
|---|---|
| Model | DT1350-P |
| Brand | Disney |
| Input Voltage | 120V AC, 60Hz |
| Power Consumption | 15W |
| Color | Purple |
| Remote Control | Included |
Indications and notices on the cabinet, chassis, and parts.
Warning about high voltage parts while the electric current is flowing.
Replace parts with those having the same safety characters.
Ensure parts and wires are returned to their original positions.
Handle CRT with care to avoid implosion due to shock.
Use designated parts and do not modify high voltage circuits.
Confirm parts, wiring, and insulation before final checks.
Include model number, version letter, part number, and description.
Use specified silicon grease (YG6260M) and remove old grease.
Size, type, deflection, magnetic field, position, and size details.
Broadcasting system, tuner type, channel coverage, and frequency.
Power source, consumption, and protector details.
Safety circuit, IC protector, safety, and radiation compliance.
Operating and storage temperature, operating humidity.
Picture, audio, and caption control options available on screen.
Available language settings for the On-Screen Display.
Sleep timer, on/off timer, and wake-up timer settings.
Key functions, operations, and multi-brand key compatibility.
Auto degauss, auto shut off, V-chip, BBE, and auto search functions.
CH allocation, channel lock, game position, owner's manual, etc.
Front and rear interface ports, switch functions, and indicators.
Dimensions and weight of the TV set.
Master carton and gift box material, dimensions, and origin.
Cabinet material, PCB compliance, and environmental standards.
Procedure for safe discharge and removal/installation of the anode cap.
Steps for safely removing and installing flat package ICs on a PCB.
Press set key and remote key for more than 1 second.
List of available service modes and their functions.
Procedure to display and check the total power on hours.
Steps for setting correct data after replacing the EEPROM IC.
Preparation and safety precautions before electrical adjustments.
Procedure to enter and adjust OSD settings.
Key electrical adjustments for TV performance.
Adjust TINT and COLOR CENT for color bar patterns.
Adjust SHIFT quantity of OVER SCAN to minimum.
Adjust vertical line to fit the shadow mask notch.
Adjust OVER SCAN for upside/downside to 10 ± 2%.
Adjust OSD horizontal difference of A and B to minimum.
Adjust BRI.CENT until white 10% is visible.
Adjust CONT MAX to contrast step No. 45.
Check fixed values of adjustment items against table.
Adjust purity magnets and 4/6 pole magnets for color convergence.
Center color using purity magnets and adjust deflection yoke.
Combine red/blue and red/blue/green using magnets.
Adjust deflection yoke and insert wedges for dynamic convergence.
Diagram showing wiring connections for electrical adjustments.
Schematic representation of the TV's internal functional blocks.
Solder side view of the main PCB with inserted components.
Solder side view of the main PCB with chip components.
Detailed schematic for the Micon/Tuner section of the main PCB.
Detailed schematic for the Chroma section of the main PCB.
Detailed schematic for the TV Power supply section of the main PCB.
Detailed schematic for the Deflection/CRT section of the main PCB.
Detailed schematic for the Sound/AV section of the main PCB.
Waveforms for Micon/Tuner section points.
Waveforms for Chroma section points.
Waveforms for Deflection/CRT section points.
Waveforms for Sound/AV section points.
Diagram showing the breakdown of TV components for assembly/disassembly.
List of replacement electrical parts with reference numbers and descriptions.
List of miscellaneous parts including fuses, holders, speakers, and connectors.
Definitions of capacitor and resistor abbreviations used in the list.
To Next Page