Ditch Witch 410SX - Drilling; Leaving Jobsite

410sx Operator’s Manual Operation Overview - 35
Drilling
Drilling
1. Start unit. See page 44.
2. Dig approach trench and target trench. See page 69.
3. Assemble drill string and position tractor. See page 69.
4. Begin drilling. See page 71.
5. Use drill string guide as needed. See page 72.
6. Add rod. See page 73.
7. Backream. See page 73.
8. Shut down tractor. See page 45.
9. Disassemble joints. See page 74.
Leaving Jobsite
1. Restore jobsite. See page 82.
2. Rinse equipment. See page 82.
3. Stow tools. See page 82.
4. Haul equipment away from jobsite. See page 50.