10 750/752 Tracker - CONTROLS
CONTROLS
10 750/752 Tracker - CONTROLS
CONTROLS
Fore/Aft/Left/Right + Mode
Pressing these buttons enters tracker control mode and starts
tracker control code transmission (see OPERATION).
Fore/Aft/Left/Right + Depth
Pressing and holding these buttons for three seconds calibrates
roll (see OPERATION).
Fore/Aft/Left/Right + Up
Pressing and holding these buttons calibrates pitch (see
OPERATION).
Fore/Aft/Left/Right + Mode
Pressing these buttons enters tracker control mode and starts
tracker control code transmission (see OPERATION).
Fore/Aft/Left/Right + Depth
Pressing and holding these buttons for three seconds calibrates
roll (see OPERATION).
Fore/Aft/Left/Right + Up
Pressing and holding these buttons calibrates pitch (see
OPERATION).