Ditch Witch FX30 - Page 104

104 FX30 - MAINTENANCE
BLOWER
104 FX30 - MAINTENANCE
BLOWER
Relief Valve
Check relief valve for proper
operation every 50 hours. To
check:
1. Ensure that vacuum inlet
valve and drain valve are both
closed.
2. Start engine. Vacuum will start
to build.
3. When vacuum goes over
relief, check for suction at the bottom of the relief air filter.
4. If suction is not present, stop engine and check relief valve.
Drive Components
Check drive components every
100 hours. Adjust and tighten if
necessary.
Relief Valve
Check relief valve for proper
operation every 50 hours. To
check:
1. Ensure that vacuum inlet
valve and drain valve are both
closed.
2. Start engine. Vacuum will start
to build.
3. When vacuum goes over
relief, check for suction at the bottom of the relief air filter.
4. If suction is not present, stop engine and check relief valve.
Drive Components
Check drive components every
100 hours. Adjust and tighten if
necessary.