108 FX30 - MAINTENANCE
WATER PUMP
108 FX30 - MAINTENANCE
WATER PUMP
Water Pump
Check water pump unit every 10 hours for leaks, loose fittings,
unusual noise or vibration. Repair if necessary.
Regulator
Check for proper operation of regulator every 10 hours. To check:
1. Start engine.
2. Connect water pressure hose to water lance.
3. Move water pressure switch to on.
4. Squeeze water lance handle. Water pump should engage.
5. Release water lance handle. Water pump should disengage.
6. If pump does not engage and
disengage with movement of
water lance handle, regulator
(2) is not functioning properly.
See water pump manual for
more information.
Hoses
Check hoses every 50 hours for
wear or damage. Replace as
needed.
om2448a.eps
2
Water Pump
Check water pump unit every 10 hours for leaks, loose fittings,
unusual noise or vibration. Repair if necessary.
Regulator
Check for proper operation of regulator every 10 hours. To check:
1. Start engine.
2. Connect water pressure hose to water lance.
3. Move water pressure switch to on.
4. Squeeze water lance handle. Water pump should engage.
5. Release water lance handle. Water pump should disengage.
6. If pump does not engage and
disengage with movement of
water lance handle, regulator
(2) is not functioning properly.
See water pump manual for
more information.
Hoses
Check hoses every 50 hours for
wear or damage. Replace as
needed.
om2448a.eps
2