FX30 - CONTROLS 17
CONSOLE DESCRIPTIONS
FX30 - CONTROLS 17
CONSOLE DESCRIPTIONS
Ignition Switch
This switch has three positions.
1. Insert key and turn clockwise
to first position. Glow plug
indicator will light.
2. When indicator light turns off,
turn switch all the way
clockwise.
3. Release when engine starts.
Key willl return to on position.
IMPORTANT: If engine does not start in cold weather, see
“Cold Start” in OPERATION.
4. Turn counterclockwise to STOP position to stop engine.
IMPORTANT: When engine is on, blower operates and vacuum
is present at tank inlet.
Engine Temperature Indicator
This indicator lights if cooling
system fluid overheats.
1. Turn off engine and let cool.
2. Check cooling system fluid
level.
Ignition Switch
This switch has three positions.
1. Insert key and turn clockwise
to first position. Glow plug
indicator will light.
2. When indicator light turns off,
turn switch all the way
clockwise.
3. Release when engine starts.
Key willl return to on position.
IMPORTANT: If engine does not start in cold weather, see
“Cold Start” in OPERATION.
4. Turn counterclockwise to STOP position to stop engine.
IMPORTANT: When engine is on, blower operates and vacuum
is present at tank inlet.
Engine Temperature Indicator
This indicator lights if cooling
system fluid overheats.
1. Turn off engine and let cool.
2. Check cooling system fluid
level.
To Next Page
Loading...
