64 FX30 - OPERATION
VACUUM BOOM (optional)
64 FX30 - OPERATION
VACUUM BOOM (optional)
4. Pull boom latch cable to release boom.
5. Use tethered boom controller to:
• raise boom until it celars the saddle.
• extend/retract boom to desired length.
• raise/lower boom to desired height.
6. Rotate boom by manually swinging it left or right.
4. Pull boom latch cable to release boom.
5. Use tethered boom controller to:
• raise boom until it celars the saddle.
• extend/retract boom to desired length.
• raise/lower boom to desired height.
6. Rotate boom by manually swinging it left or right.
To Next Page
Loading...
