Ditch Witch FX30 - Service

FX30 - LUBRICATION 87
HYDRAULICS
FX30 - LUBRICATION 87
HYDRAULICS
Check
With frame level, check oil at
dipstick (1) every 10 hours.
Add THF at fill (1) as necessary.
Clean dust from cap by blowing
with low-pressure air.
Change
Drain hydraulic oil (2) and refill
with THF after first 100 hours of
operation and every 1000 hours thereafter. Change oil every 500
hours if jobsite temperature exceeds 100°F (38°C) more than
50% of the time.
Check
With frame level, check oil at
dipstick (1) every 10 hours.
Add THF at fill (1) as necessary.
Clean dust from cap by blowing
with low-pressure air.
Change
Drain hydraulic oil (2) and refill
with THF after first 100 hours of
operation and every 1000 hours thereafter. Change oil every 500
hours if jobsite temperature exceeds 100°F (38°C) more than
50% of the time.