JT100/JT100 All Terrain Operator’s Manual Conduct a Bore - 119
Operate Carriage Control
Operate Carriage Control
The thrust/rotation control allows the four basic functions (shown) to be
combined. The chart below shows examples of functions that occur when
control is put at a combined position. Operator must be in seat for control to
function.
Carriage Movement Rotation Direction
forward clockwise (makeup)
IMPORTANT: On units equipped with assisted makeup, move
joystick to the left to initiate the makeup cycle. See page 174.
reverse counterclockwise (breakout)
IMPORTANT: On units equipped with assisted makeup, move
the joystick to the right to initiate the breakout cycle. See
page 174.
To Next Page
Loading...
