JT100/JT100 All Terrain Operator’s Manual Systems and Equipment - 139
Driver/Loader Attachment
Driver/Loader Attachment
Anchor Drilling Unit
Crushing weight could cause death or serious injury. Use
proper procedures and equipment or stay away
274-204.
To help avoid injury:
• Drive anchors properly before drilling.
• Wear high-top protective boots with legs of pants completely tucked inside.
• Wear protective gloves.
• If you are not driving two anchors to full depth, drive optional ground rod into soil away from drilling
unit and connect ground rod to drilling unit.
Electric shock will cause death or serious injury. Stay
away.
274-049
To help avoid injury: Maintain minimum clearance of 10’ (3 m) between
driver/loader or load being lifted and energized power lines.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
274-050; 274-724 (2P)
To Next Page
Loading...
