JT100/JT100 All Terrain Operator’s Manual Systems and Equipment - 175
Cruise Control
Adjust Settings
Override
• To override settings, move joystick out of neutral and beyond current setting. Unit will increase to new
setting.
• To return to previous setting, release joystick.
Disengage
To disengage cruise control, move joystick out of neutral and in opposite direction of carriage travel. Green
control cycle light will go off.
Resume
1. Position joystick out of neutral in direction of carriage travel.
2. Press resume. Green control cycle light will come on.
Setting Instructions
Thrust or Pullback • To increase thrust or pullback speed while joystick is in neutral position,
press resume.
• To decrease thrust or pullback speed while joystick is in neutral position,
press set.
Rotation • To increase rotation speed, move joystick to left and press resume.
• To decrease rotation speed, move joystick to left and press set.
RESUME /
SET /
c00ic113h.eps
To Next Page
Loading...
