Service - 206 JT100/JT100 All Terrain Operator’s Manual
Startup/10 Hour
Check Drilling Fluid Y-Strainer
Clean drilling fluid y-strainer before startup and
every 10 hours of operation. Ensure that strainer
is free of debris.
Check JT Fluid Pump Liner Wash
Level
Check fluid level at petcock (2) before startup and
every 10 hours of operation. Add antifreeze and
fresh water as needed at fill (1).
Inspect Crankcase Breather Tube
Inspect crankcase breather tube (shown) for debris
before startup and every 10 hours of operation.
To Next Page
Loading...
