132 JT920/JT920L - MAINTENANCE
GENERAL COMPONENTS
132 JT920/JT920L - MAINTENANCE
GENERAL COMPONENTS
Saver Sub
Remove saver sub as needed. To remove, smooth end of sub
with file and remove two nuts (1). Remove wrench collar (3).
Then remove two nuts (2) on rod end of cylinders. Remove bolts
(4) and shield (5). Remove six screws (6) and saver sub (7).
Pipe Loader
Check pipe loader shuttle inserts (A)
and pipe loader shuttle inserts (B) for
wear. Replace as needed. See your
Ditch Witch dealer for replacement
parts.
om2089a.eps
om0287h.eps
Saver Sub
Remove saver sub as needed. To remove, smooth end of sub
with file and remove two nuts (1). Remove wrench collar (3).
Then remove two nuts (2) on rod end of cylinders. Remove bolts
(4) and shield (5). Remove six screws (6) and saver sub (7).
Pipe Loader
Check pipe loader shuttle inserts (A)
and pipe loader shuttle inserts (B) for
wear. Replace as needed. See your
Ditch Witch dealer for replacement
parts.
om2089a.eps
om0287h.eps
To Next Page
Loading...
