Ditch Witch JT920L - PIPE

140 JT920/JT920L - MAINTENANCE
PIPE
140 JT920/JT920L - MAINTENANCE
PIPE
PIPE
Before pipe is used first time:
• Hand-lubricate threads and shoulders with TJC.
• Join pipe and tighten joint.
• Break joint.
• Move pipe back to box and repeat.
Each time pipe is used:
• Keep threads clean and well-lubed with TJC. Lube threads
and shoulders of male joints with TJC.
• Keep inside of pipe clean. Drain fluid from pipe.
• Replace damaged pipe.
• Only use TJC available from your Ditch Witch dealer to
maintain warranty.
• Follow directions carefully. Screw pipes together correctly. Do
not bend pipe beyond recommended bend limit.
Cleaning Threads
Clean threads as needed with high-pressure water and soap. Do
not use gasoline or similar solvents.
PIPE
Before pipe is used first time:
• Hand-lubricate threads and shoulders with TJC.
• Join pipe and tighten joint.
• Break joint.
• Move pipe back to box and repeat.
Each time pipe is used:
• Keep threads clean and well-lubed with TJC. Lube threads
and shoulders of male joints with TJC.
• Keep inside of pipe clean. Drain fluid from pipe.
• Replace damaged pipe.
• Only use TJC available from your Ditch Witch dealer to
maintain warranty.
• Follow directions carefully. Screw pipes together correctly. Do
not bend pipe beyond recommended bend limit.
Cleaning Threads
Clean threads as needed with high-pressure water and soap. Do
not use gasoline or similar solvents.