SK750/SK755 Operator’s Manual Service - 54
Precautions
CMW
Jump Starting Precaution
Welding Precaution
Explosion possible. Serious injury or equipment damage could occur.
Follow directions carefully.
To help avoid injury:
• Keep sparks and flames away from battery. Battery gas can explode.
• Follow instructions to prevent damage to electronic components.
• Only jump-start in extreme circumstances. Follow procedures on page 70 if jump starting is
necessary.
Explosion possible. Serious injury or equipment damage could occur.
Follow directions carefully.
NOTICE:
• Disconnect battery to prevent damage to battery. Do not turn off battery disconnect switch
with engine running, or alternator and other electronic devices may be damaged.
• Connect welder ground clamp close to welding point and make sure no electronic
components are in the ground path.
• Always disconnect the Engine Control Unit ground connection from the frame, harness
connections to the ECU, and other electronic components prior to welding on machine or
attachments.
To Next Page
Loading...
