Need help?Do you have a question about the Dixon 2003 ZTR 3304 and is the answer not in the manual?
General| Year | 2003 |
|---|---|
| Manufacturer | Dixon |
| Model | ZTR 3304 |
| Engine | Briggs & Stratton |
| Fuel Type | Gasoline |
| Cylinders | 1 |
| Displacement | 344 cc |
| Transmission | Hydrostatic |
| Type | Zero Turn Lawn Mower |
| Cutting Width | 33 inches |
| Engine Type | 4-Cycle OHV |
| Cutting Height | 1.5-4.5 inches (3.8-11.4 cm) |
Provides essential safety guidelines for general mower operation.
Details safe practices and warnings for operating the mower on slopes.
Outlines precautions to prevent accidents involving children.
Covers safety precautions related to fuel handling and general service.
Details for the ZTR 3303 model, including chassis, body, engine, and dimensions.
Details for the ZTR 3304 model, including chassis, body, engine, and dimensions.
Details for the ZTR 3363 model, including chassis, body, engine, and dimensions.
Explains the operation of the mower's primary control levers for movement and turning.
Details how to engage and disengage the parking brake for safety and stability.
Describes the zero turning radius transmission and how each lever controls a wheel.
Instructions for engaging and disengaging the mower blades on different models.
Checklist of essential steps and safety checks before starting the mower.
Step-by-step guide for starting the mower engine and preparing for operation.
Tips for achieving optimal performance when side discharging grass clippings.
Best practices and tips for effective mulching using the mower.
A schedule of recommended maintenance tasks and their service intervals.
Instructions for engine maintenance, battery charging, and off-season storage.
Procedures for checking, maintaining, and replacing mower blades.
Steps for changing engine oil and oil filters, and proper oil disposal.
Solutions for engine starting issues, stalling, and overheating.
Troubleshooting for the mower not moving, losing power, or transmission overheating.
Addresses problems with cut quality, drive system performance, and operator presence.
To Next Page
