Need help?Do you have a question about the Dixon RAM 48ZT and is the answer not in the manual?
General| Brand | Dixon |
|---|---|
| Model | RAM 48ZT |
| Category | Lawn Mower |
| Language | English |
Defines terms like left/right relative to machine's direction.
Discusses road regulations and securing the machine.
Provides caution and guidelines for towing equipment.
Outlines intended use and general safety principles.
Emphasizes support from specialized retail stores.
Explains where to find the machine's identification numbers.
Explains risk of injury or death from manual neglect.
Explains risk of material damage from neglect.
Identifies symbols for reverse, neutral, fast, slow, choke, fuel, brake.
General safety advice and warnings.
Rules for safe operation, clear area, bystanders, passengers.
Lists required protective gear like glasses, gloves, boots.
Precautions for mowing on inclines and avoiding tip-overs.
Safety measures regarding children around the mower.
Procedures and warnings for refueling.
Safety rules for performing maintenance.
Guidelines for loading, unloading, and securing the machine.
Precautions for towing with the machine.
Identifies all control levers and buttons on the machine.
Explains operation of zero-turn steering controls.
Describes function for starting and stopping the engine.
Explains engine speed regulation.
How to engage/disengage mower deck.
Displays total operating time and oil change alerts.
For cold starts with richer fuel mixture.
How to engage and disengage the brake.
For adjusting mower tracking straightness.
How to set the deck cutting height.
For moving the machine by hand.
Location and capacity, fuel type.
Location and operation.
Location and function of fuses.
How to adjust the operator's seat.
Guidance for new zero-turn mower operators.
Detailed instructions on forward, backward, and turning.
Pre-operation checks and conditions.
Step-by-step guide to start the engine.
Procedures for jump-starting.
How to operate the mower after starting.
Safety and technique for mowing slopes.
Advice for efficient and optimal mowing.
Procedures for safely shutting down the engine.
Instructions for disengaging drive to push mower.
Lists required maintenance tasks and intervals.
Cleaning, terminal care, and charging.
Verifying safety interlocks function correctly.
Visual checks and adjustment.
Recommended tire inflation.
Checking for wear and damage.
Removal and installation of the deck belt.
Removal and installation of the pump belt.
Setting rollers for optimal cutting.
Sharpening, replacement, and balancing.
Leveling the cutting deck.
Checking and servicing caster wheels.
Procedures for washing and cleaning.
Inspecting for loose or missing fasteners.
Type of grease, oil, and cleaning advice.
Greasing wheel mounts and bearings.
Greasing deck spindle points.
Greasing outer spindle points.
Referring to engine manual.
Procedure for changing transaxle fluid and filter.
Problems like engine not starting or starter not turning.
Rough running, weak engine, vibration.
Engine overheating, battery not charging.
Slow, uneven movement, deck engagement problems.
Transaxle leaks, uneven mowing.
Steps for storing the machine for extended periods.
Advice on ordering parts and annual checks.
Visual representation of the machine's wiring.
Recommended torque values for fasteners.
Details on engine manufacturer, type, power, fuel.
Details on drive system, speed, brakes.
Cutting width, height, weight, overall dimensions.
Information on compliance labels and certifications.
Tasks performed upon delivery.
Lists service tasks for different hour intervals.
To Next Page