EasyManua.ls Logo

Dixon Ultra 52 User Manual

Dixon Ultra 52
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator Manual
Gasoline containing up to 10% ethanol (E10) is acceptable for
use in this machine. The use of any gasoline exceeding 10%
ethanol (E10) will void the product warranty.
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
Form Number 115 521627 Rev A 2012-08-15
Ultra 52 / 966690603
Question and Answer IconNeed help?

Do you have a question about the Dixon Ultra 52 and is the answer not in the manual?

Dixon Ultra 52 Specifications

General IconGeneral
BrandDixon
ModelUltra 52
CategoryLawn Mower
LanguageEnglish

Summary

Introduction to the Operator Manual

General Information and Usage

General information about the manual and its use.

Transporting on Public Roads

Guidelines for transporting the machine on public roads.

Towing Procedures and Cautions

Instructions and cautions for towing the machine.

Safe Operating Practices

General operating principles and safety precautions.

Good Service and Identification

Good Service and Support

Information on where to get good service for Dixon products.

Manufacturing and Serial Numbers

How to locate the machine's manufacturing and serial numbers.

Symbols and Decals

Warning and Information Symbols

Explains important warning and information symbols used in the manual.

Operational and Safety Symbols

Symbols indicating machine functions and safety precautions.

Compliance and Protective Gear Symbols

Symbols for safety glasses, hearing protection, and certifications.

Safety Pictograms

Visual warnings and instructions for safe operation.

Safety

General Operation Safety

Crucial safety instructions for safe general operation.

Personal Protective Equipment

Recommended PPE for safe operation and handling.

Hazardous Condition Safety

Safety measures for slopes, children, gasoline, and electrical hazards.

Transport and Maintenance Safety

Safety guidelines for transport, towing, and maintenance.

Controls

Control Locations and Identification

Identifies the location of various controls on the machine.

Steering and Movement Controls

How to operate steering controls for movement and turning.

Engine and Blade Controls

Ignition, throttle, choke, blade switch, and fuses.

Operator Comfort and Deck Controls

Seat adjustment, hour meter, and cutting height adjuster.

Fuel and Tracking Controls

Fuel shut-off valve and tracking adjustment.

Operation

Operator Training and Familiarization

Guidance for new operators to become familiar with the mower.

Steering and Maneuvering

How to steer the mower forward, backward, and turn.

Pre-Start and Engine Starting

Steps to perform before and during engine starting.

Mowing Operations and Tips

Operating on hills, mowing tips, and best practices.

Stopping and Manual Movement

Procedures for safely shutting down the engine and moving the machine manually.

Maintenance

Maintenance Schedule Overview

A schedule of required maintenance tasks and intervals.

Battery and Tire Maintenance

Battery care, charging, and tire pressure checks.

Brake, Belt, and Roller Systems

Maintaining parking brake, belts, and anti-scalp rollers.

Blade and Deck Systems

Blade replacement and mower deck adjustment/leveling.

Wheel, Cleaning, and Other Tasks

Caster wheel service, general cleaning, and hardware checks.

Lubrication

General Lubrication Procedures

Overview of lubrication points, frequency, and general guidelines.

Component Lubrication

Lubricating wheels, spindles, and engine/transaxle.

Transaxle Fluid Service

Step-by-step guide to changing transaxle fluid.

Troubleshooting

Engine Starting and Running Issues

Troubleshooting engine start, rough running, and weak performance.

Machine Operation and Mowing Problems

Troubleshooting movement, deck engagement, mowing results, and vibration.

Storage

Winter Storage Preparation

Steps for preparing the machine for winter storage.

Service and Parts Ordering

Advice on ordering parts and annual service.

Technical Data

Electrical Schematic

Diagram of the mower's electrical system.

Engine, Transmission, and Tire Specs

Technical details for engine, transmission, and tires.

Equipment, Productivity, and Torque Specs

Specifications for cutting, productivity, and torque values.

Service Journal

Delivery and Initial Service

Tasks for initial delivery service.

Scheduled Maintenance Intervals

Maintenance tasks for 10, 25, 50, and 100-hour services.

Major Service and Annual Checks

Maintenance tasks for 300-hour service and annual checks.

Related product manuals