E-7
Installing Cube 50 on stand
*Speaker stands are not included.
Insert into the stand base
φ35mm speaker stands
Using the VHF Transmitter :
1- Open the cover at bottom and insert 2 AA batteries
2- Plug in the Lavalier or Headset Microphone
3- Switch ON the transmitter, the ’Low Batt’ LED will be lighten in
red when battery is low.
4- Turn the Wireless Mic volume on the Cube 50
5- Ready to talk with your Lavalier / Headset microphone.
Note : DON’T use handheld Microphone and VHF transmitter at the
same time.
To Next Page
Loading...
