Step 1
Install bottom board
Step 2
Install autopilot system
Step 3
Install motors, ESCs
Step 4
Install top board
Step 5
Install propellers
Install screws by appropriate force
to prevent breaking threads.
U s e a d e q u a t e s c r e w g l u e f o r
installing screws.
Please wire neatly. Make sure wires will
not be cut by frame boards and propellers.
Smooth out the boards edge if necessary.
Please install propellers after autopilot system
configuration procedure.
Make sure the rotation direction of propellers are
the same as the figure shows.
In up figure, arms ①② front of craft, arms ④⑤ are back of craft. See from top, motors on arms ①③⑤ rotate counter-clock wise, use propellers 1045;
motors on arms ②④⑥ rotate clock wise, use propellers 1045R.
To Next Page
Loading...