5. After the firmware upgrade is successful, GL60
ZOOM will enter the recalibrated state. You need to
wait a few seconds to complete the upgrade operation.
(Reminder: if GL60 ZOOM does not respond, you need
to restart the aircraft and wait for the successful
calibration.)
ⅱ. TF card firmware upgrade
To learn about GL60 ZOOM firmware update or to download
the latest version of the firmware, please visit the official
website of CZI: www.gzczzn.com.
In case GL60 ZOOM cannot work normally due to UAV
firmware update, please contact the local agent or manufacturer
in time.
To Next Page
Loading...