dji MATRICE 300 RTK - Page 71

©
2020 DJI All Rights Reserved.
71
MATRICE 300 RTK User Manual
b. If the warning distance set in the app is less than 16 m, and the obstacle is within 16 m but has
not reached the warning distance, the obstacle will be indicated by a green frame; when the
obstacle is within 16 m and reaches the warning distance, it turns orange; when the obstacle
approaches the obstacle breaking distance, it turns red.
c. When the obstacle sensing is disabled, OFF will be displayed; when obstacle sensing is turned
on, the vision systems are not working but infrared sensing systems are available, TOF will be
displayed; when obstacle sensing is turned on but not working, NA will be displayed.
Top Bar
1. Back: Tap to return to the homepage of the DJI Pilot 2 app.
2. System Status Bar: indicates the aircraft ight status and displays various warning messages. If a
new alert appears during ight, it will also be displayed here and continue ashing. Tap to view the
information and stop the ashing.
3. Flight Status:
a. The flight statuses include: standby, preparing to take off, ready to go, manual flight,
mission ight, pano in progress, ActiveTrack, returning to home, landing, forced landing,
and vision positioning.
b. When the aircraft is in vision positioning, standby, or manual ight status, the current ight
mode will be displayed, including: P-mode, S-mode, A-mode, and T-mode.
c. Tap to enter Preight Check view.
4. Intelligent Flight Battery Level Indicator: The battery level indicator bar provides a dynamic display of
the remaining power of the current intelligent ight battery and the ying time. Each battery state is
1 2 3 4 5 6 7 8