dji MATRICE 300 RTK - Page 77

©
2020 DJI All Rights Reserved.
77
MATRICE 300 RTK User Manual
Smart Track
Introduction
When operating the H20N or H20 series gimbal camera, the pilot can use Smart Track to identify, lock
and track targets such as people, vehicles, boats, or other objects. After recognizing and locking the
target, it will automatically rotate the gimbal to situate the target in the center of the screen, and adjust
the camera focal length to an appropriate focus rate to track and view the target.
When the tracked target is set to objects, the tracking eect will be limited.
Use Smart Track in an open environment to avoid blocking the target.
When the aircraft is returning to the Home Point, landing or set to T-mode, Smart Track will
be disabled. The device will exit Smart Track immediately in any of the above situations.
Identifying and Locking a Target
Smart Track can be enabled after entering zoom view in the app.
1. Tap to start or stop Smart Track.
2. The feature identies a person, vehicle, or boat as the target. Alternatively, you can gesture on the
screen to select another object as the target.
Tap to switch between gimbal follow mode and gimbal free mode.
When Smart Track is enabled, a tracking frame will appear and select the target, and
the cross hairs in the center of the zoom lens will turn green, indicating that tracking is in
progress. If no target is conrmed, the tracking frame will not appear and the app will display
the message "Searching for targets ..." If the target is blocked or lost, the device will predict
and search for the trajectory of the target until it is reacquired before resuming the tracking.
Otherwise, the device will quit Smart Track.
If the user is selecting other types of targets by gesturing on the screen, any person, vehicle
or boat that appears in the frame will be selected as the target and tracked.
An object cannot be selected using gestures if the features of the object are not clear.
1
2