dji MATRICE 600 - Mounting the Gimbal (Optional)

12
©
2016 DJI. All Rights Reserved.
Motors
1. Keep the motors free of dust.
2. If a motor is stuck and unable to rotate freely, execute the CSC (Combination Stick Command) to stop the
motors immediately.
Electronic Speed Controllers
1. Ensure the ESCs sound a normal tune when powered on.
DJI GO App
1. Be sure to fully charge your tablet or mobile device before launching the DJI GO app. A tablet is
recommended for a better user experience.
2. If you are using a phone as your mobile display device, be sure to continue ying safely when the phone
receives an incoming call. DO NOT accept phone calls during ight.
3. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related
regulations in your area. You are solely responsible for being aware of all relevant regulations and ying in
a way that is compliant. Read and understand the warning messages before:
a. Using the Auto-take off and Auto-landing features.
b. Re-setting your Home Point.
c. Setting the altitude beyond the default limit.
d. Switching between ight modes.
4. Land your aircraft immediately if there is an alert shown in the app.
5. Examine and check all warning messages on the checklist displayed in the app prior to each ight.
6. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if you do not
have sufcient experience to be comfortable operating the aircraft.
7. Beginner Mode is enabled by default when you launch the DJI GO app for the rst time. The aircraft’s
altitude and ight distance is restricted when ying in Beginner Mode. We recommend you y in Beginner
Mode to perfect your ight skills. Operate the actual aircraft only after you are condent that you have
mastered adequate ight skills.
8. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before
each ight.
Firmware
To avoid serious injury to children and animals, observe the following rule:
1.
Keep children and animals at a safe distance during any rmware upgrade, system calibration, and
parameter setting procedures.