dji MATRICE 600 - Flight Status Indicators

46
©
2016 DJI All Rights Reserved.
MATRICE 600 User Manual
Normal
Blinking Red, Green and Yellow Alternatively
Power on and self-check
×4 Blinking Yellow Four Times Aircraft warming up
Blinking Green Slowly Safe to Fly (P-mode with GPS)
Blinking Yellow Slowly Safe to Fly (No GPS)
Blinking Yellow
(Alternates with other ight mode and D-RTK patterns)
Intelligent Flight Mode
Blinking Blue (Alternates with ight mode patterns) Using D-RTK GNSS
Blinking Blue Rapidly for 1.5 seconds
Switching devices (IMU or GPS
modules) for the modular redundancy
system
Aircraft Status Indicator
Front/Rear LEDs
Front/Rear LEDs
There is a Front/Rear LED on each frame arm of the Matrice 600 to show the orientation of the aircraft
after motors started. The Front LEDs are red and located on frame arms M1 and M2. The Rear LEDs
are green and located on frame arms M3 to M6.
Aircraft Status Indicator
The Aircraft Status Indicator shows the system status of the ight controller. Refer to the table below
for more information about the Aircraft Status Indicator:
5. The DJI GO app is connected to the aircraft.
6. Motors start properly and are functioning as normal.
Flight Status Indicators