©2012 DJI Innovations. All Rights Reserved. 14
For users whose aircraft takes off at lowest throttles position, please set the idle speed at a low
level.
For common users, please set Motor Idle Speed to RECOMMEND or above, since setting idle
speed too low may affect motor(s) spool up.
Tips:
The output pulse width for every grade of Motor Idle Speed is as followed
There is relationship between the output pulse width and the max/min pulse width when TX End
Point is 100%.
output pulse width＝(max pulse－min pulse) x proportion + min pulse
You can get the proportional values by computing according to the above formula for a special TX.
Use Futaba TX for example. Notice that Futaba TX End Point is 100%.
To Next Page
Loading...
