dji O3 Air Unit - DJI O3 Air Unit; Diagram; Installation and Connection

4
©
2022 DJI All Rights Reserved.
DJI O3 Air Unit
DJI O3 Air Unit is an advanced video transmission device featuring DJI long-range low-latency HD
transmission O3+ technology. The air unit can be mounted on a racing drone and used with DJI goggles
and a remote controller to transmit video, control signals, and ight controller information wirelessly.
Diagram
1. Camera
2. Coaxial Cable
3. Linking Status Indicator
4. Link Button
5. 3-in-1 Port
6. Dual-Band Dual-Polarized Antenna
(IPEX1 connector)
7. USB-C Port
8. microSD Card Slot
Installation and Connection
Mount the air unit on a racing drone or other devices.
Mount the air unit on the aircraft with good ventilation and heat dissipation. DO NOT install
the air unit in an enclosed area. Otherwise, the air unit will overheat during use and the image
transmission may be lost.
8
7
12
5
3
4
6