EN
6
Introduction
The Osmo Action Charging Hub can charge up to three
batteries for Osmo Action. When using an ofcial DJI USB
adapter, the charging hub charges the two batteries with
the higher battery level simultaneously first, and takes
approximately 130 minutes to fully charge three batteries.*
When using a non-ofcial DJI USB adapter, the charging hub
charges the batteries one at a time in order of the battery
level from high to low. The three LED indicators indicate the
battery level and the charging status.
1
2
3 4
1. LED Indicators
2. Battery Ports
3. USB-C Port
4. Button
* Charging time is for reference only.
Usage
Place the battery into the battery ports as shown in the gure
below. Connect the USB adapter to the USB-C port on the
charging hub to begin charging. Refer to the LED Indicators
Description section for more information about charging.
To Next Page
Loading...
