Charging
To charge Osmo Mobile 4, connect a USB adapter (not included) to the charging port using the
power cable (included).
Connect your mobile phone to the USB-A port. If Osmo Mobile 4 is powered on, the mobile phone
will begin to charge. If Osmo Mobile 4 is powered off, press the M button once to start charging.
Attaching the Phone
1. The provided Magnetic Phone Clamp and Magnetic Ring Holder can be used to mount a phone
to Osmo Mobile 4.
a. Using the Magnetic Phone Clamp: attach the phone clamp in the center of the phone.
b. Using the Magnetic Ring Holder: attach the ring holder in the center of the phone. Read the
Osmo Mobile 4 Magnetic Ring Holder User Guide carefully to make sure you are using the ring
holder properly.
To Next Page
Loading...
