© 2015 DJI. All Rights Reserved.
2
2. Connecting Batteries
Insert the Intelligent Flight Battery into the charging port to begin charging.
The Intelligent Flight Battery with the highest power level will be fully charged rst.
Other batteries will be charged in the same manner, according to their power
Charging Hub Diagram
[1] Status LED 1
[2] Charging Port 1
[3] Charging Port 2
[4] Status LED 2
[5] Power Port
[6] Status LED 3
[7] Charging Port 3
[8] Charging Port 4
[9] Status LED 4
[10] Firmware Update Port
(Micro-USB Slot)
Using the Charging Hub
Following the instructions below to use the Charging Hub:
1. Connecting to a Power Source
Connect the standard Phantom 3 Battery Charger to a power outlet (100-240V
50/60Hz), then connect the Charging Hub to the Phantom 3 Battery Charger.
[10]
[1]
[4]
[3]
[2]
[9]
[6]
[5]
[8]
[7]
Charger
Charging Hub
Power Outlet
To Next Page
Loading...
Need help?
General
