EasyManua.ls Logo

dji POWER 500 - DJI Power 500 Specifications; DJI Power 500

dji POWER 500
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DJI Power 1000/500 User Manual
©
2024 DJI All Rights Reserved.   
21
[2] The USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1
protocol and use a USB cable that meets EPR specications.
[3] The SDC port supports extensive accessories.
[4] Cycle Life is tested under the 600W Standard Recharge mode with an output power of 1000 W and a room
temperature of 25° C (77° F).
DJI Power 500
General
Model DYM500L/DYM500H
Capacity 512 Wh
Net Weight Approx. 7.3 kg
Dimensions 305×207×177 mm (L×W×H)
Max Operating
Altitude
3000 m
Output Ports
AC Output
[1]
(×2) DYM500L: 100-120 V AC, 50/60 Hz, 800 W (Rated), 1000 W (Max.
continuous output)
DYM500H: 220-240 V AC, 50/60 Hz, 800 W (Rated), 1000 W (Max.
continuous output)
AC Output (Bypass
mode)
DYM500L: 100-120 V AC, Max. 1000 W
DYM500H: 220-240 V AC, Max. 1000 W
USB-A Output (×2) 5 V 3 A / 9 V 2 A / 12 V 2 A
Max output power per port: 24 W
USB-C Output (×2) 5/9/12/15/20 V 5 A
Max. 100 W per port (Needs support of PD3.0 protocol)
SDC Output SDC Lite: 9-27 V, Max. 240 W
Input Ports
AC Input DYM500L: 100-120 V AC, 540 W (recharging), 1000 W (bypass)
DYM500H: 220-240 V AC, 540 W (recharging), 1000 W (bypass)
SDC Input SDC Lite: 22.4-29.2 V DC, Max. 300 W, Max. 10 A
USB-C Input 5-20 V DC, Max. 100 W (Need support of PD protocols)
Supports simultaneous power input with two USB-C ports at a max
200 W.
Battery
Cell Chemistry LFP (lithium ferrophosphate)
Cycle Life
[2]
Maintains over 80% capacity after 3,000 cycles
Operating Temperature
Power Supply
Temperature
-10° to 45° C (14° to 113° F)

Other manuals for dji POWER 500

Related product manuals