156
Note:
"and,” “or,” and “not" are logical operations, and the returned result will be a Boolean value: “True,” or “False.”
Boolean values:
(1) Objective: Returns “False” if a condition is met; otherwise, “True” is returned.
(2) Returned value: Boolean
(3) Example: Set either-or conditions
If any point of the gimbal armor is attacked, all gimbal LEDs will blink red; if any point of the chassis armor
is attacked, all chassis LEDs will blink red. Here, when the attached armor is "not on gimbal," this indicates it
must be "on the chassis."
To Next Page
Loading...
