Checklist
Before each use, check the robot and make sure that:
• All the cables are securely and firmly connected to the motion controller, and
the chassis rear cover is securely mounted.
• Cables of the intelligent controller, launcher, camera and speaker are securely
and firmly connected.
• The microSD card is inserted into the intelligent controller.
• The intelligent controller antennas are adjusted to the vertical angle or oriented
to the signal source.
• The Intelligent Battery is fully changed and mounted in position.
7. Connecting the App
The robot can connect the app via Wi-Fi or router to enter Single Drive or Multi-
player Battle mode. The available modes vary depending on the connection
method.
To Next Page
Loading...
