dji RONIN-S Universal Mount - Usage; Installing the Universal Mount to a Carrier

2
Usage
Installing the Universal Mount to a Carrier
Select from the two installation methods listed below according to the
position of the 1/4"-20 holes on your carrier.
Method 1: Install the mount to the carrier through the 1/4"-20 holes on
the bottom of the mount.
36
36
Method 2: Install the mount to the carrier through the screw slots on the
base plate.
Base Plate
Unit: mm
81
135
18
36
3/8"-16 Holes 1/4"-20 Holes
Unit: mm
1/4"-20 Holes