EasyManuals Logo

dji SPARK Manual

dji SPARK
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Controller Signal Level
Vision System State (On/Off)
Current Flight Mode
Take off / Landing Button
Return To Home Button
Back To Main Screen
Forward Anti-collision System State.
Important: The Forward Anti-collision system is active even in PRO MODE (without
the remote controller), BUT in this mode the Spark can fly faster than the reaction
time / brake distance that the Spark need to avoid forward collision
Right Info Panel
Controller* / Device / Spark GPS state + satellite number
Controller / Device / Spark battery level in percentage
*Only Inspire and M100 Remote Controllers have GPS
Left Info Panel
Drone Speed
Drone Altitude from Take off point
Drone Distance from Piloting Device

Other manuals for dji SPARK

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji SPARK and is the answer not in the manual?

dji SPARK Specifications

Operating Environment IconOperating Environment
max speed31 mph (50 kph)
operating temperature32° to 104° F (0° to 40° C)
charging temperature41° to 104° F (5° to 40° C)
Camera IconCamera
sensor1/2.3” CMOS
effective pixels12 Megapixels
video recording modesFHD: 1920×1080 30p
Power IconPower
charger input100-240 V, 50/60 Hz, 0.5 A
charger output5 V 3 A / 9 V 2A / 12 V 1.5 A
battery capacity1480 mAh
Remote Control IconRemote Control
operating frequency2.4G / 5.8G
max transmission distance (Wi-Fi)100 m (Distance), 50 m (Height)
max transmission distance (Remote Controller)2000 m
Weight and Dimensions IconWeight and Dimensions
weight300 g
dimensions143×143×55 mm

Related product manuals