dji Video Transmitter - Installation and Connection; Mounting the RS Gimbal Mounting Plate

5
©
2023 DJI All Rights Reserved.
EN
Mounting the RS Gimbal Mounting Plate
The RS gimbal mounting plate is required when using the video transmitter with the DJI RS series
gimbal or other devices compatible with the cold shoe. The following description uses DJI RS 3
Pro as an example.
1. Mount the gimbal mounting plate to the front of the video transmitter and tighten the two
M4×12 screws.
2. Toggle the lever on the gimbal mounting plate in counterclockwise to lower the positioning
block.
3. Connect the cold shoe on the gimbal mounting plate to DJI RS 3 Pro.
4. Toggle the lever on the gimbal mounting plate in clockwise to lock the video transmitter.
DJI RS 3 Pro