dji Video Transmitter - Display Screen Operations; Home Screen Elements

9
©
2023 DJI All Rights Reserved.
EN
Display Screen Operations
Home Screen
1. Video Signal Input Status
/ : indicates if there is a video source signal input or not.
2. Power Supply Voltage
: displays the voltage of the battery or the DC-in power input.
3. Device Number
: displays the device number of the video transmitter. Users can set the number in the
menu as the letter A to P.
4. Video Transmission Signal Quality and Connection Status
Connected
: when Broadcast mode is disabled, it displays the connection status between the
receiver and transmitter and the signal quality. There are four statuses, including connected
(green), weak signal (orange), strong interference (red), and disconnected (gray).
5. Broadcast Code and Channel
: displays the universally unique identifier of the device when Broadcast mode is
enabled for the video transmitter.
CH1
: when the channel mode is set to manual, it displays the channel in use. Press the
menu dial twice for quick channel adjustment.
AUTO
: when the channel mode is set to auto, this icon will appear. Users cannot adjust the
channel manually.
A
Connected
16.8V
A
CH1
1E3M
16.8V
5
1
2
3
4