dji Video Transmitter - Installation and Connection; Mounting the WB37 Intelligent Battery

3
©
2023 DJI All Rights Reserved.
EN
Installation and Connection
Mounting the WB37 Intelligent Battery
Before rst use, activate the WB37 battery by charging with the WB37 Battery Charging Hub
(USB-C). Refer to the WB37 Battery Charging Hub (USB-C) User Guide for more information.
1. Mount the WB37 battery adapter to the back of the video transmitter and tighten the three
M4×12 screws.
2. Insert the WB37 battery into the battery slot and push it to the end. Make sure that the battery
release button pops up, indicating the battery is rmly in place.
Make sure to use the WB37 battery within the operating temperature range. DO NOT disassemble
or pierce the battery in any way. Otherwise, the battery may leak, catch re, or explode. Refer to the
WB37 Intelligent Battery Safety Guidelines for more information.
Press and hold the release button and push the battery in the opposite direction to remove it.