dji Zenmuse Z15-BMPCC - Specifications

26
©
2014 DJI. All Rights Reserved.
Zenmuse Z15-BMPCC
User Manual
Specications
General
Built-In Functions Three Modes
Orientation-locked
Non orientation-locked
FPV mode (Reset)
Built-in independent IMU module
DJI-designed servo drives
HDMI-HD/AV module
Wireless video transmission module
support
Camera record control support
Wide range voltage input support
S-Bus/PPM Receiver support
Peripheral
Supported Camera BMPCC
Supported Lens Currently OLYMPUS M.ZUIKO DIGITAL ED 12mm f/2.0
GCU Input Power 4S~12S LiPo (Recommend 6S if used with the S800 EVO or S1000)
Control Requirement Minimum of four spare receiver channels
Assistant Software System
Requirement
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
Mechanical& Electrical Characteristics
Working Current Static current: 200mA (@25V)
Dynamic current: 400mA (@25V)
Locked-rotor current: 1.8A (@25V)
Operating Temperature -10°C ~ 50°C
Weight 1.26Kg
Dimensions 227mm(H) × 212mm(D) × 210mm(W)
GCU Weight 63g
GCU Dimensions 64.2 mm × 34.1mm × 19.5mm
Working Performance
Load Weight (Reference Value) 487g(@BMPCC with OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0, Battery
and SD-Card)
Controlled Angle Accuracy 0.01°
Maximum Controlled Rotation
Speed*
Pan axis: ±130°/s
Tilt axis: ±130°/s
Roll axis: ±30°/s
Controlled Rotation Range Pan axis control: ±360° continuous rotation
Tilt axis control: +50°/-140°
Roll axis control: ±40°
Note*: Gimbal’s Maximum Controlled Rotation Speed corresponds to TX stick input pushed to
100% end-points.
Appendix