4
©
2014 DJI. All Rights Reserved.
In the Box
Gimbal ×1
The gimbal includes built-in Z15-BMPCC DJI servo drive
modules and an independent IMU module and HDMI
-
HD/
AV module.
Gimbal Control Unit (GCU) ×1
Connect the GCU to the Flight Control System using the
CAN-Bus. The GCU will control the gimbal’s pan, roll and
tilt movements.
GCUGCU
ROLL
TILT
PAN
MODE
SHUT
AUX1
AUX2
AUX3
Lens Retaining Ring ×1
Mounting the camera lens.
Mounting Bracket ×4
Mounting the gimbal to landing gear.
Mounting Board for Receiver ×1
Attaching the GCU and providing a convenient mount for
the receiver or other devices.
Cable Clamp ×1
Cable management.
Camera Mount Screw ×2
Standard tripod mount on the camera.
In the Box
To Next Page
Loading...
