dji Zenmuse Z15-BMPCC - Page 5

©
2014 DJI. All Rights Reserved.
5
Zenmuse Z15-BMPCC
User Manual
Lens Retaining Ring Screw ×1
Attaching the lens retaining ring to the gimbal.
Screw Package ×1
Mounting gimbal to aircraft (M2.5*8 cap head screw).
9-Pin Cable ×2
Connecting GCU to gimbal.
7-Pin Cable ×1
Connecting GCU to Lightbridge air system.
6-Pin Cable ×2
Connecting GCU to gimbal.
Camera Record Control Cable ×1
Connecting gimbal HDMI/AV unit to camera.
Servo Cable Package×1
Connecting GCU and receiver.
AV Video Power Cable ×1
Connection between GCU and Wireless Video
Transmission Module transmitting the AV signal.
iOSD Mark II Cable ×1
Connecting GCU and DJI iOSD MarkII.
Micro-USB Cable ×1
Adjusting parameters and upgrading rmware via a PC.
CAN-Bus Cable ×1
CAN-Bus – Flight Control System communication.
D J I
D J I
Spare Package×1
Vibration Absorbers, Spare Screws, and Mounting Bracket .
In the Box