5. Connecting to non-Bluetooth (Aux-IN) devices
For devices that do not have Bluetooth or support for Bluetooth audio, you can connect and play
music and audio by connecting your device to the AUX IN jack on the the DKnight Big MigicBox with
the included 3. 5mm audio cable.
1> Turn on the DKnight Big MagicBox by pressing and holding the power button for 3 seconds.
2> Plug one end of the 3.5 mm audio cable into the AUX IN jack on the right side of the DKnight Big
MagicBox and plug the other end into the headphone jack on your device. You can then play
your music and audio on the DKnight Big MagicBox.
IMPORTANT NOTE:
When in AUX IN mode the forward/backward and volume +/- is controlled from the device only. +,-,
<< and >> will not function on the DKnight Big MagicBox.
To Next Page
Loading...