Need help?Do you have a question about the DLS Sub 3.10 and is the answer not in the manual?
General| Driver Size | 10 inches |
|---|---|
| Frequency Response | 150Hz |
| Crossover Frequency | 150 Hz |
| Inputs | Line-level RCA |
| Frequency Range | 30Hz - 150Hz |
| Type | Active Subwoofer |
Read manual before unpacking and installing for optimal subwoofer performance.
Treat speaker with care; clean with a soft cloth and warm soapy water.
Details of the DLS Sub 3.10 active subwoofer, 160W amplifier, and 10" woofer.
Options for connecting to surround or stereo amplifiers.
Connect subwoofer to surround amplifier's line output using a 'Line Cable'.
Connect to stereo amplifier pre-amp outputs (line level) or speaker outputs (high level).
Overview of controls like Crossover, Volume, EQ, Phase, and the Power LED.
LINE LEVEL INPUT (RCA) and SPEAKER LEVEL INPUT (speaker terminals).
Main power switch, input socket, and main switch for 115V/230V selection.
Using the 'Power' switch and understanding the Power LED status.
Allow approximately 50 hours of playback for optimal performance.
Room acoustics and subwoofer position significantly affect bass reproduction.
Adjusts balance between subwoofer and other speakers for a pleasant sound.
Changes bass roll-off for 2-channel or surround, and optimizes room response.
Continuously adjustable from 30 to 150 Hz to split frequencies with front speakers.
Adjusts subwoofer phase 0-180° to correct for out-of-phase issues with front speakers.
Reduce volume if distortion occurs, indicating potential subwoofer overloading.
Contact dealer for service; one-year warranty against factory defects.
To Next Page
